Hi Everyone,
My brick project is done! I had so much fun exploring new craft supplies with this project. I played with supplies I already owned and bought a few things along the way too. First and foremost the best part of this project was the reading and research involved. I happen to own 3 books about Woodbridge so it was fun to get them out and really look through them. I learned a lot about Woodbridge history and that as you know, is a good thing. I also went online and found out that my local library is part of a network of archives that has uploaded all kinds of media in regard to their local area. That was awesome. I was able to download the actual program for the celebration of the dedication for the Memorial Municipal Building from 1924! This little program booklet even had pictures of the floor plan of the building. I was amazed by looking through all the media that my local library had available online. It was wonderful. So I chose my picture for the key-chain and as you know I had to figure a way to embed my little sliver of brick. I had tried the UTEE embossing but its yellow cast was just not clear enough for me. I am told the longer you melt it the more it will take on that yellow tone. So I will save the rest of my 2 jars of UTEE for bottle cap projects. Next I tried cold cure epoxy. I must say that it is a fun resin to work with but 12 hours later in my dusty craftspace, I was simply annoyed. You know I cut paper and paper has a lot of fiber, when you add that to having a cat walking across your work table . . . well . . . . let's just say I could not get a clear cast to save my life. Plus the mixing and pouring and waiting . . . there was just no instant gratification. So then I moved onto UV cure resin. HELLO . . . love at first try (well, love at about try 10). I went to Hobby Lobby and picked up a bottle of Lisa Pavelka's magic gloss. Now you need to know I already own a UV lamp. That would be my Teresa Collins Stampmaker. OK, so I bought it, used it once, and true to form it sits on a shelf (laughing at me) Well wait a minute . . . It did get me through that ping pong ball project from 2011! but I haven't used it since. So I knew I had like 36 watts of UV power just sitting on the shelf. I did some research and found in the big box craft stores there are 2 brands of UV cure resin. Judikins (
Gel du Soleil) and Lisa Pavelka (Magic Gloss). I chose the Lisa Pavelka not because we share a name (only she spells it kinda funny, hehehe) but because that is the brand Hobby Lobby had. $9.95 for an ounce. It's OK because I had a 40% coupon that took off $4.00. Then I chose some bezel pieces from the jewelry section. $1.99 each. I didn't know what I was going to do so I picked an oval, a rectangle, and a square (2 each). Well, the rectangle won and the rest of them will happily live in my craft stash (most likely for 10 years or so) Cha Ching . . . that's $8.00 that won't see the light of day for awhile. Ok, now I am onto the graphic, I got all these cool supplies, I know the size of the bezel piece, I am ready to design. I open up my CA2, I get the shape on my mat, I got the graphic I am jones'n! Oh, I like it! Perfect I say to myself. But wait, what kind of paper? Let's try photo paper. Wow it looked great! Yes, it looked great right up until I poured the Magic gloss on it, then I watched the ink spread in to a big blurry mess. Oh well . . . back online for more research, and sure enough you need to seal the image so that there is no reaction between the resin and the ink. I read lots of ways to seal the image and I settled on using packing tape. If you do this make sure when you lay the tape on the image you have no air bubbles or fuzzies caught on the tape or the image. Once I got a handle on that it was smooth sailing, yup as smooth as a boat on dry land. Because the next issue is bubbles. So here is the deal with that. Once you pour the resin you absolutely have to pass either your embossing heat gun or a mini butane torch over the piece to remove all the bubbles. You just can't pop them with a pin. The heat will draw them to the surface and they pop. It is the same with the cold cure resin. It's all about the bubbles. In Champagne, bubbles are good . . . in resin, not so much! I get all that worked out and then I decide I want to dome the back side of the key-chain as well. Sure enough every time I got a good front, I would mess up the back or vise-verse. If I had a good back the front was messed up. I tore the darn key-chain apart about 8 times before I finally got a hand for what I was doing. I found it easy to use a Dremmel tool to break apart the resin without to much damage to the bezel blank. Still with all the issues I fell in love with Lisa Pavelka Magic Gloss and I actually went back to Hobby Lobby to get another bottle of it. Here are a few more pictures:
I have to tell you all that I did have to enlist the hubby dude to cut the brick. Hard as I tried I just could not cut as nice of a sliver as he could. For some reason he was able to maintain that long thin brick like appearance. I kept breaking it while trying to get it as thin as needed. It is only about 2 mm thick and 10 mm long. So here is my "shout out" to the hubs . . . Thanks Paul! I am so happy with the way this brick project played out, because I learned some things, bought some new crafty good supplies, used a tool that I already owned that was gathering dust but mostly because I got to use the brick in a way I can share with some of the people around me. I am so happy that I am still inspired by an old piece of clay as that tells me I have not yet hit my crafty wall. Thanks for stopping by and I hope you check back soon.
Lysa
